Northstar Wood Fireplace
Description
The Northstar exceeds the strictest environmental standards in the nation—so you can enjoy roaring fires even in areas where conventional wood-burning fireplaces are banned.
- 68,200 BTUs—Heats 1,000 to 2,600 square feet based on climate and home efficiency
- 2.7 cu ft interior capacity / 22 in. maximum log length
- Up to 10 hours of burn time from each load of wood†
- EPA certified with emission levels of just 1.8 grams per hour
Additional information
| Fireplace Style | EPA |
|---|---|
| Fireplace Type | Single Sided |
| Heat Output | High |
| Wood Fireplace Brand | HeatnGlo |
Specifications
Refer to installation/owner’s manual for detailed specifications on installing this product. Hearth & Home Technologies reserves the right to update units periodically. Product installation must adhere strictly to instructions shipped with product.
Model Specifications
NORTHSTAR
| Size: | Medium |
|---|---|
| Appliance Width: | 40″ |
| Appliance Height: | 40-1/2″ |
| Appliance Depth1: | 23-1/2″ |
| Appliance Rear Width: | 40″ |
| Framing Width: | 42-1/2″ |
| Framing Height: | 56 3/4″ |
| Framing Depth: | 24″ |
| Framing Front Width: | 42-1/2″ |
| Framing Back Width: | 42-1/2″ |
| Fuel Type: | Wood |
| Peak BTU/hr Output2: | 68,200 |
| Heating Capacity3: | 1,000 – 2,600 sq ft |
| Maximum Burn Time4: | 10 Hours |
| Firebox Capacity: | 2.7 cubic feet |
| Recommended Log Length: | 22″ |
| Viewing Area: | 37 x 31-1/8″ |
| Efficiency5: | 76% |
| Emissions: | 1.8 grams/hour |
1 Appliance Depth includes entire unit including depth of firebox and extension onto hearth.
2 BTU: 1st hour output uses high burn efficiency number. BTU will vary depending on the type of fuel used and moisture content of the fuel.
3 This is a general guide, see your local dealer for help in determining the product that best suits your heating needs based on climate, home efficiency, location of the heater, and air movement in the room.
4 Actual burn times will vary based on how the appliance is operated, load size, moisture content and type of wood used.
5 Weighted Average LHV (Low Heating Value) efficiency.
Heat output will vary depending on the type of fuel used. The flame and ember appearance may vary based on the type of fuel burned and the venting configuration used. Actual product appearance, including flame may differ from image shown. Refer to the owner’s manual for complete clearance requirements and specifications. Product specifications and pricing subject to change without notice. For testing and listing information please refer to the owner’s/installation manual.
*For select products: Heating capacity to be used as a guide only. See your local dealer for help in determining the product that best suits your heating needs based on climate and home efficiency.
†For wood-burning appliances: Actual burn times will vary based on how the appliance is operated, load size, moisture content and type of wood used, and installation.
